Send Message

automatic Magnetic Water Tank Level Controller Module Sensor

1 Set/Sets
$100.00 - $350.00 / Sets
automatic Magnetic Water Tank Level Controller Module Sensor
Features Gallery Product Description Request A Quote
Protection Grade: IP65
Temerature: -40~150℃
Signial Output: Switching Sgnial,4-20mA
After Service: Twelve Months
Certificate: ISO9001:2000
Pressure: 16MPa
Contact Type: SPST, SPDT
Detect Point: 8 Switch Detect 8 Point
Life Span: 5-10 Years
Material: 304
Port: Shanghai/shenzhen
High Light:

float switch fluid level controller


water tank level controller

Basic Infomation
Place of Origin: Sichuan, China (Mainland)
Brand Name: Vacorda
Certification: CE/TUV/ISO9001/SGS
Model Number: UHK
Payment & Shipping Terms
Packaging Details: standard package with wooden box
Supply Ability: 1000 Set/Sets per Month
Product Description

Diesel fuel tank magnetic float level switch


UHK magnetic floating ball and float level switch are made up of reed pipe and magnetic float. It is based on the buoyancy principle, using the floating ball with magnetic components to drive the corresponding position of the reed tube to close or disconnect, so as to realize the detection and control of the high and low position of the liquid level.
UHK magnetic float and float liquid level switch are equipped with 8 switches for 8 point detection. When the magnetic float ball level switch works, it has no direct contact with the measured medium, no mechanical wear and tear on the contacts, and it can work without external power supply.

automatic Magnetic Water Tank Level Controller Module Sensor 0

automatic Magnetic Water Tank Level Controller Module Sensor 1


1, long life span, stable and reliable operation, easy installation, almost no maintenance 

2, none influence of measured medium in physical and chemical state. Eg: medium electrical conductivity, 

 dielectric constants, foam, pressure, temperature, evaporation, boiling, bubbling effect etc, .

3, choose appropriate material can be used in a variety of bad media environment with densities ≥ 0.5G/CC ; 

4,-interface measurement with two media of different density control;

5,wide range of application. Pressures from vacuum to PN160 (special up to PN320), temperature -40~+150 ° c; 

6,design, explosion-proof, suitable for explosive environments; 

7,UHKG controller can be used to control the upper and lower liquid level.



Two control method of one magnetic float level gauge:

1,the upper limit—users select the normally open contact connectionthe machine starts when the liquid level reaches the controlled upper limit and the node close. 

When the liquid level reaches the controlled lower limit and the node opens, the machine stops. (eg. When the liquid flows out the  pump);

2,the lower limit—users select the normally closed contact connection: the machines starts when the liquid level reaches the controlled lower limit and the node closes. When the liquid level reaches the controlled upper limit and the node closes, the machine stops. (eg. When the liquid flows in the pump);


Technical Data:

Max insert depth

L=6m(>6m customize)

Max control scope


Min control scope

50mm(<50mm customize)

Medium density


Working pressure

PN2.5~ PN160(Max pressure PN320)

Working temperature

-40~80 °C, -40~120 °C, -40~150 °C (250°C customize )

Float diameter

D28~D120(depending on pressure and density



Installation type

Flange: DN40~DN150

Flange standard: HG/T20592~2009

(pressure>PN25, Flange>DN125)

G2'' thread

Other method (consulting)

Maximum switch frequency




Working power supply


Max voltage of switch 


Max current of switch 


Installation angle

< ±25°

Wiring box

M20×1.5 female thread

IP grade


Explosion-proof grade

Exd II CT6Gb

 automatic Magnetic Water Tank Level Controller Module Sensor 2

automatic Magnetic Water Tank Level Controller Module Sensor 3

Recommended Products
Get in touch with us
Characters Remaining(20/3000)