Stainless steel magnetic float
UHC magnetic float level gauge consists of reed, precise resistance and SCM circuit and adopt imported advanced sensor components and signal transmitters. When the magnetic line of the magnetic float ball reaches a certain place of the level gauge, the reed closes, and the float ball changes with the height of level interface. SCM transformation processing circuit converts the change of the interface height into linear 4~20mADC signal and relay contact output to realize the measurement, transmission and warning of the level location signal.
Application
UHC series magnetic float ball liquid level gauge is widely used in petroleum, chemical industry, oil field, pharmaceuticals industry, food, wine industry etc.
Product Parameters
|
(1)connection: |
flangeDN50~DN150 RF G2" thread |
|
(2)pipe diameter: |
20mm, 14mm |
|
(3)maximum lehgth: |
6000mm, 3000mm |
|
(4)electrical connection: |
M20x1.5 female thread |
|
(5)power supply: |
16~30VDC |
| (6)Explosion-proof grade: | ExiaIICT5 or ExdIIct5 |
| (7)Operating pressure: | PN2.5~PN160(special for PN320) |
|
(8)Operating temperature: |
-40~80°C, -40~120°C |
|
(9)protection class: |
IP65 |
|
(10)output signal: |
2 wire 4~20mADC |
Workshop and Processing
Workshop and Processing
Principle of the remote magnetic flap level gauge
Because the remote magnetic flap level gauge is composed of a magnetic flap level gauge and a reed remote transmitter, combining the two components of the magnetic flap level gauge &1 introduces the working principle of the magnetic flap level gauge. The basic type of magnetic flap level gauge is a magnetic flap level gauge, also known as a magnetic float level gauge. Based on the structure of the connector, the principle of buoyancy and the magnetic coupling characteristics, real-time measurement of the liquid level is realized. When the liquid level in the measured container rises or falls, the magnetic float used to sense the change of the liquid level in the main measuring tube will also rise or fall. The permanent magnet steel in the float drives the magnetic flap outside the main measuring tube to flip 180&; 180 flux magnetic coupling; the two sides of the valve are painted with different colors (usually red and white) to indicate the position of the liquid level. When the liquid level in the container rises, the valve changes from white to red. When the liquid level in the container drops, the valve changes from red to white. The red and white junction of the indicator is the actual height of the liquid level in the container, so as to realize the accurate measurement and local display of the liquid level.
