Large Dn Magnetic Flowmeter Electromagnetic Flow Meter For Lime Milk
HKLD intelligent electromagnetic flowmeter is a kind of fully intelligent electromagnetic flowmeter developed by our company with advanced technology at home and abroad. Its Chinese electromagnetic converter core uses high-speed central processing unit. The calculation speed is very fast, the accuracy is high, and the measurement performance is reliable. The circuit design of the converter adopts international advanced technology, the input impedance is up to 10 ohms, the CMRR is better than 100db, and the rejection ability for external interference and 60Hz/50Hz interference is better than 90db. It can measure the flow rate of fluid medium with lower conductivity.
Features
1. The measurement results are independent of physical parameters, such as flow distribution, fluid pressure, temperature, density and viscosity.
2. It is very convenient to use the meter and easy to operate.
3. The flowmeter is effective when used. The high-precision 16-bit embedded processor is used to enhance the stability of the measurement.
4. Ultra-low EMI switch is equipped in the flow meter, and the power supply voltage range is wide.
5. Electromagnetic flowmeter has self-check function
Product Parameters
Product Name |
Electromagnetic Flowmeter |
Repeatability error |
+/-0.1% |
Accuracy class |
0.5 class, 1.0 class |
Measured medium temperature |
Common rubber lining: -20~+60 ° c |
High temperature rubber lining: -20~+90 ° c |
|
PTFE lining: -30~+100 ° c |
|
High temperature vinyl lining: -30~+180 ° c |
|
Rated working pressure |
pipeline: DN10~DN65: ≤ 2.5MPa;DN80~DN150: ≤ 1.6MPa; |
Flow rate range |
0.3~15m/s |
Measured fluid conductivity |
≥5μs/cm liquid |
Output |
4~20mA / 4~20mA + Hart |
Electrode material |
316L, titanium (Ti), tantalum (Ta), Hastelloy (H), Platinum |
Working power supply |
85~265VAC / 24VDC / Battery |
Straight pipe length |
pipe: ≥ 5DN in the upper reaches, downstream of greater |
|
|
Protection grade |
standard: IP65; IP68(optional) |
Explosion-proof mark |
mdllBT4 |
Deatail Images
Electromagnetic flowmeter as an effectively measure the volume flow rate of conductive media, its main components include sensors, flow conversion and processing instruments. And its main feature is that it has no throttling flow-resisting parts, it is not easy to block, has good corrosion resistance, and has a wide range of applicable media. The measurement accuracy is not affected by physical parameters such as temperature, viscosity, density, pressure, and specific gravity of the measured medium. A certain conductivity range is independent of the type of liquid being calibrated.
As a most widely used flow instrument, electromagnetic flowmeters are commonly used to measure conductive liquids such as tap water, sewage, and seawater. Therefore, after running for a period of time, it is easy to contaminate the electrode or to precipitate and foul in the measurement tube wall. So the adhered scale layer in the measuring tube of the electromagnetic flowmeter should be removed in time, otherwise the instrument may not work properly.