| Working Pressure | Pipeline: DN10~DN65: ≤ 2.5MPa |
|---|---|
| Chamber Material | Stainless Steel, Carbon Steel |
| Power Supply | 85~265VAC 45~63HZ |
| Repeatability Accuracy | +/-0.1% |
| Pipe Size | DN10~DN1200 |
| Product Name | DN10~DN2400 Electromagnetic Flow Meter , Magnetic Water Flow Meter Direct Reading |
|---|---|
| Medium | Conductive Liquid |
| Power Supply | 220VAC/24VDC/Battery |
| Output | 4-20mA /4-20mA + Hart |
| Material | Carbon Steel/SS304/SS316L |
| Pressure | PN16-PN63 |
|---|---|
| Output Signal | 4-20mA/RS485/HART |
| Medium | Clean Liquid Air |
| Operating Temperature | -20 ~ +120 °C |
| Measuring Range | <1200m3/h |
| Pressure | PN16-PN63 |
|---|---|
| Output Signal | 4-20mA/RS485/HART |
| Medium | Clean Liquid Air |
| Operating Temperature | -20 ~ +120 °C |
| Measuring Range | <1200m3/h |
| Accuracy | 1.5 Standard |
|---|---|
| Application | Small Pipe, Low Flow Rate |
| Medium | Corrosion, Non Corrosion Meduim |
| Material | 304,316 L,1Cr18Ni9Ti, 0Cr18Ni9, 00Cr17Ni14Mo2,321, Titanium |
| Connection | Flange |
| PTFE Lined Pipe | 10, 15, 20, 25, 32, 40, 50, 65, 80, 100... |
|---|---|
| Rubber Lined Pipe | 40, 50, 65, 80, 100, 125, 150, 200, 300, 35 |
| Flow Direction | Positive And Negative, Net Flows Turndown |
| Measuring Range Ratio | 150:1 |
| Repeatability Error | +/-0.1% |
| Operating Temperature | -20 ~ +120 °C |
|---|---|
| Medium | Clean Liquid Air |
| Pressure | PN16-PN63 |
| Nominal Diameter | DN6-DN200 |
| Output Signal | 4-20mA/RS485/HART |
| Product Name | Turbine Flow Meter |
|---|---|
| Material | 304,316L,321 |
| Output Signal | 4-20mA/RS485/HART |
| Operating Temperature | -20 ~ +120 °C |
| Nominal Diameter | DN6-DN200 |
| Product Name | Turbine Flow Meter |
|---|---|
| Material | 304,316L,321 |
| Output Signal | 4-20mA/RS485/HART |
| Operating Temperature | -20 ~ +120 °C |
| Nominal Diameter | DN6-DN200 |
| Application Range | Liquid: Water; Diesel; Gasoline |
|---|---|
| Primary Measured Value | Flow Rate |
| Secondary Measured Value | Volume Flow |
| Connection | Flange: DN15-DN300;Wafer: DN15-DN300 |
| Measurement Ratio | Standard -10:1 |
