| Application Range | Liquid: Water; Diesel; Gasoline |
|---|---|
| Primary Measured Value | Flow Rate |
| Secondary Measured Value | Volume Flow |
| Connection | Flange/thread/clamp |
| Output Signal | 4-20mA/RS485/HART |
| Application Range | Liquid: Water; Diesel; Gasoline |
|---|---|
| Primary Measured Value | Flow Rate |
| Secondary Measured Value | Volume Flow |
| Connection | Flange: DN15-DN300;Wafer: DN15-DN300 |
| Measurement Ratio | Standard -10:1 |
| Medium | Liquid,gas,steam |
|---|---|
| Fluid Temperature | -40~320℃ |
| Nominal Pressure | 1.0~6.3Mpa |
| Accuracy | Liquid:1.0,gas:1.5 Insertion Type :2.5 |
| Power Supply | 12V,24VDC,3.6lithium |
| Medium | Liquid,gas,steam |
|---|---|
| Fluid Temperature | -40~320℃ |
| Nominal Pressure | 1.0~6.3Mpa |
| Accuracy | Liquid:1.0,gas:1.5 Insertion Type :2.5 |
| Power Supply | 12V,24VDC,3.6lithium |
| Product Name | Factory Supply Electronic Customizable Vortex Flow Meter |
|---|---|
| MediumTemperature | -40~320℃ |
| Nominal Pressure | 1.0~6.3Mpa |
| Medium | Liquid,gas,steam |
| Accuracy | Liquid:1.0,gas:1.5 Insertion Type :2.5 |
| Medium | Liquid,gas,steam |
|---|---|
| Fluid Temperature | -40~320℃ |
| Nominal Pressure | 1.0~6.3Mpa |
| Accuracy | Liquid:1.0,gas:1.5 Insertion Type :2.5 |
| Power Supply | 12V,24VDC,3.6lithium |
| Mddium Temperature | -40~320℃ |
|---|---|
| Nominal Pressure | 1.0~6.3Mpa |
| Product Name | Steam Air Vortex Wafer Type Flow Meter |
| Medium | Liquid,gas,steam |
| Accuracy | Liquid:1.0,gas:1.5 Insertion Type :2.5 |
| Fluid Temperature | -40~320℃ |
|---|---|
| Nominal Pressure | 1.0~6.3Mpa |
| Medium | Liquid,gas,steam |
| Accuracy | Liquid:1.0,gas:1.5 Insertion Type :2.5 |
| Power Supply | 12-30VDC (Two Wire 4-20mA), 3.6VDC(for Three Years) |
| Chamber Material | Stainless Steel, Carbon Steel |
|---|---|
| Power Supply | 85~265VAC 45~63HZ |
| Pipe Size | DN10~DN1200 |
| Repeatability Accuracy | +/-0.1% |
| Output Current | 4~20mADC |
| Application Range | (1) Gas; (2) Liquid; (3) Steam |
|---|---|
| Primary Measured Value | Flow Rate |
| Secondary Measured Value | Volume Flow |
| Connection | Flange: DN15-DN300;Wafer: DN15-DN300 |
| Measurement Ratio | Standard -10:1 |
