Send Message

PTFE Magnetic Float Liquid Level Switch

1 Piece/Pieces
MOQ
$150.00 - $350.00 / Pieces
Price
PTFE Magnetic Float Liquid Level Switch
Features Gallery Product Description Request A Quote
Features
Specifications
Pipe Diameter: 14mm/16mm/20mm(customize)
Medium Density: >=0.5g/cm3
MAX Installation Depth: 6000mm
Float Diameter: PN≤6.3MPa,float Diameter=45mm; PN>6.3MPa,float Diameter=65mm
MAX Voltage: 250VAC,230VDC
MAX Current: 0.6A(SPDT);2A(SPST)
MAX Volume: 0.6A:60W(reed Pipe Type); 2A:200W(jiggle Switch)
Protection Grade: IP65
Installation Type: DN50~DN150/RF/PL(HG/T20592-2009)
Product Name: Float Level Switch
Port: Shanghai/Shenzhen
High Light:

float switch fluid level controller

,

water level controller

Basic Infomation
Place of Origin: Sichuan, China (Mainland)
Brand Name: VACORDA
Model Number: HKD
Payment & Shipping Terms
Packaging Details: Wooden box
Supply Ability: 350 Piece/Pieces per Month
Product Description

PTFE magnetic float liquid level switch 

PTFE Magnetic Float Liquid Level Switch 0

Magnetic float level switch consist of reed and magnetic float ball, which is based on the floating principle that utilizes magnetic float ball to make the relevant reed close or open according to the height changing of the liquid level, thus controlling and measuring the liquid level.

 

Product features

1.Long life span, stable and reliable operation, easy installation, almost no maintenance

2.Independent of mediums physical and chemical status

3. Appliable for all kinds of bad medium environment with density ≥0.5g/cm³

4. Available for interface detection of mediums with two different densities

5. Wide application range. Pressure 0~PN160 (max. up to PN320), temperature -40~+150 ° c

 

 Product Parameters

(1) High temperaturre type:

≤150℃

(2)Protection grade:

IP65

(3)Working temperature scope:

-40℃~80℃  -40~120℃

(4)Anti-explosion grade:

EXia EXd

(5)Installation Angle :

≤±25°

(6)Installation Type: DN50/RF/PL(HG/T20592-2009)
(7)Float Diameter: PN≤6.3MPa,float diameter=45mm; PN>6.3MPa,float diameter=65mm

(8)Medium Density:

≥0.5g/cm3

(9)Connection :

M20*1.5 female thread

(10)MAX Installation Depth:

6000mm

  PTFE Magnetic Float Liquid Level Switch 1

PTFE Magnetic Float Liquid Level Switch 2

PTFE Magnetic Float Liquid Level Switch 3

PTFE Magnetic Float Liquid Level Switch 4

Features

1, long life span, stable and reliable operation, easy installation, almost no maintenance

2, none influence of measured medium in physical and chemical state. Eg: medium electrical conductivity,

dielectric constants, foam, pressure, temperature, evaporation, boiling, bubbling effect etc, .

3, choose appropriate material can be used in a variety of bad media environment with densities ≥ 0.5G/CC ;

4,-interface measurement with two media of different density control;

5,wide range of application. Pressures from vacuum to PN160 (special up to PN320), temperature -40~+150 ° c;

6,design, explosion-proof, suitable for explosive environments;

7,UHKG controller can be used to control the upper and lower liquid level.

 

Operation:

Two control method of one magnetic float level gauge:

1,the upper limit—users select the normally open contact connection: the machine starts when the liquid level reaches the controlled upper limit and the node closes.

When the liquid level reaches the controlled lower limit and the node opens, the machine stops. (eg. When the liquid flows out the pump);

2,the lower limit—users select the normally closed contact connection: the machines starts when the liquid level reaches the controlled lower limit and the node closes.

When the liquid level reaches the controlled upper limit and the node closes, the machine stops. (eg. When the liquid flows in the pump);

 

Technical Data:

Max insert depth L=6m(>6m customize)
Max control scope L-120mm
Min control scope 50mm(<50mm customize)
Medium density >0.5g/cm3
Working pressure PN2.5~ PN160(Max pressure PN320)
Working temperature -40~80 °C, -40~120 °C, -40~150 °C (250°C customize )
Float diameter D28~D120(depending on pressure and density)

 

 

Installation type

Flange: DN40~DN150
Flange standard: HG/T20592~2009
(pressure>PN25, Flange>DN125)
G2'' thread
Other method (consulting)
Maximum switch frequency <1×105
Inaccuracy ±8±2mm
Working power supply 220VAC/380VAC
Max voltage of switch <250VAC
Max current of switch 5A
Installation angle < ±25°
Wiring box M20×1.5 female thread
IP grade IP65
Explosion-proof grade Exd II CT6Gb

 

The magnetic suspension level gauge and the container to be measured form a communicating device, so that the liquid level between the container to be measured and the measuring tube body is equal. When the float in the measuring tube of the liquid level gauge changes with the measured liquid level, the magnetic body in the float interacts with the magnetic body in the color code displayed on the display bar and reverses, so that red means there is liquid and white means no The purpose of accurately displaying the liquid level on the spot.

PTFE Magnetic Float Liquid Level Switch 5
PTFE Magnetic Float Liquid Level Switch 6
Magnetic levitation pair installed horizontally
A) When the user receives the product, he must carefully check the product to see if there is any damage during transportation and whether it is consistent with the order requirements. After checking, install it correctly in the following order.
B) Float and measuring tube are packed separately. Remove the bottom flange, make the upper part of the float upward, put the float into the measuring tube, and install the bottom flange. Then connect with the container to be measured
C) The magnetic body in the float interacts with the magnet in the color bar on the display screen, the color code is reversed, red means liquid, and white means no liquid.
Note: Handle the float carefully to avoid damage; In order not to affect the read value, all the floats in the display column must be adjusted to white before installation.
Recommended Products
Get in touch with us
Characters Remaining(20/3000)